SYNAPTICON SOMANET Node 400 - Table of Contents; Encoder Port

Table of Contents
1 SOMANET Node rev. E.1
1.1 Technical Specifications
1.1.1 Power Specifications
1.1.2 General specifications
1.2 Hardware Diagrams
1.2.1 EtherCAT module
1.2.2 Processor module
1.2.3 Drive module
1.3 Installation Guide
1.3.1 Wiring instructions
1.3.1.1 Overview of connectors
1.3.1.2 Power supply, phases and brake
1.3.1.2.1 Pinout Power Terminal
1.3.1.2.1.1 Notes about choosing the supply voltage
1.3.1.2.1.2 Using a PELV or SELV power supply
1.3.1.2.1.3 Warning about using contactors behind the power supply
1.3.1.2.2 Connecting a Brake
1.3.1.3 Encoders and IO
1.3.1.3.1 Encoder Port 1
1.3.1.3.2 Encoder Port 2
1.3.1.3.3 Encoder Port 3 / Digital IO
1.3.1.3.4 Analog IN
1.3.1.3.5 EtherCAT port
1.3.1.3.5.1 EtherCAT IN Port
1.3.1.3.5.2 EtherCAT OUT Port
1.3.1.4 Connector details and mating parts numbers
1.3.2 Mounting instructions
1.3.2.1 Heat dissipation
1.3.2.2 Thermal mounting considerations
1.3.2.3 Dimensions
1.3.2.4 Interference with magnetic fields
1.3.2.5 Downloads
1.3.3 On-site installation guide
1.3.3.1 Field wiring terminal marking
1.4 LED signals
5
6
6
7
9
9
10
11
12
13
13
14
14
15
15
16
17
18
18
19
20
21
22
22
23
24
25
25
25
26
27
28
29
29
31
Hardware Manuals / SOMANET Node / SOMANET Node rev. E.1
© 2020 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 3.2.0 | Build: 2020-05-25 2/60