e1600 User Manual, Issue 1 © Synectic Systems Group Ltd 2012. All Rights Reserved
Specifications subject to change. E&OE Page 5
1 Introduction
The e1600 16-channel video and audio encoder is ideal for centralized video and audio collection
from legacy analogue systems, or as a distributed collection node encoder. The e1600 provides full
resolution (D1) full frame rate (25fps PAL/30 fps NTSC) on all channels. All channels support dual
streaming
and each stream can be configured independently for frame rate, resolution and image
quality to enable a high degree of flexibility across all input channels.
Fully compatible with Synectics MDRS and Synergy™ solutions, the e1600 can be used to present
legacy analogue feeds to an existing or new IP deployment. It may also be displayed on any Synergy
Client workstation, display wall or web client, and maybe recorded and managed via the Synectics
PSN with complete TLL (Time Lapse Later) support.
For systems requiring Video Content Analysis support, the unit is fully compatible with the Synectics
iSYNX VCA server. Third Party VMS support is also provided for through the e1600’s support for RTP
/ RTSP streaming.
1.1 System Approvals
EMC
Immunity
EN50130-4:1995+A1:1998 +A2:2003 Electromagnetic compatibility (EMC)
Product Family Standard: Immunity requirements for components of fire,
intruder and social alarm systems
Emissions
EN61000-6-3: 2007 Electromagnetic compatibility (EMC) Part 6-3: Generic
standards - Emissions for residential, commercial and light-industrial
environments
USA emissions
Title 47 of the Code of Federal Regulations (CFR) Part 15 (47CFR15)
Subpart B – Unintentional Radiators
Safety
Low voltage Safety testing
Safety Testing to EN 60950-1:2006 + A1:2010 “Information Technology equipment –Safety – Part 1
General Requirements”
Complies with EN61000-4-2:2009, EN61000-4-3:2006+A1+A2, EN61000-4-4:1995, EN61000-4-
5:1995, EN61000-4-6:1996+A1, EN61000-4-11:1994, EN50130-4:1995+A1:1998.
To Next Page
Loading...