T-Touch T-Touch POS Scale
14
Load container on the platform.
Press
key. Zero is displayed, and tare is subtracted.
Remove container on the platform. Tared weight is displayed. It can only be set to one tare value. The tare value will be
shown with a minus value. This Tare value can be cleared by pressing
key while the plate is empty. Tare can
only be performed when the load receptor is stable.
3.1.5 Pre-set Tare
POS scales have a pre-set tare function, Press and hold key until a pre-tare window appears. Input the tare
value, and then click “OK” key to store the tare value.
3.1.6 PLU (Price Look Up)
T-Touch POS scales can store up to 99999 unit prices; these are accessed using the PLU keys or PLU search function.
3.1.7 Quantity
PLU allows calculating total price base on quantity instead of weight.
3.1.8 Gravity
The scales have the gravity compensation function to adjust the gravity constant base on location for verification. Refer
section 4.5 Settings>System Settings for detail information.
3.1.9 Printing
The scale has a built-in printer. Printing takes place automatically or when the user clicks the “Print” option.
3.1.10 Software Version
The software is separated in weighing software, application software, screen key board software, and printing software.
For details see section 5.2.7 System Information.
3.1.11 Extended Resolution (x10)
The scale has an extended resolution function. Select function “Precision X10” to activate the function and to have the
result as d=0.1e. Refer section 4.5 Settings> Operation Settings for detail information.
To Next Page
Loading...
Need help?
General
