T Scale L10 Series User Manual

T-Touch T-Touch POS Scale
58
5.2.4 Sound
Buzz: Check the box to enable/disable the buzzer sound
while operating the scale.
Sound:
Speaker volume can be adjusted.
Move Scroll bar to left (decrease) or to right (increase) to
adjust the volume.
Note: Speaker Sound volume adjustments are only
applicable for L10, L15, PL10 & P18 models
5.2.5 Touch Screen Calibration
Touch screen can be calibrated if required.
It will ask to confirm. Press YES to confirm. The scale will restart. Follow the instruction to show calibration Utility
Display will be show “TSLIB calibration utility” for touch screen calibration
A [+] will appear at the top left corner for touch screen calibration.
Touch that point and 4 more points to finish the calibration. Then the scale will exit the calibration.
5.2.6 Software Update
Software Update:
System application software could be upgraded by using software update option.
Connect USB stick to the scale USB port, and select software
update.
Click OK to confirm or Cancel to escape.
By pressing OK key, software update will begin. System will restart
after the update.

T Scale L10 Series Specifications

General

Brand	T Scale
Model	L10 Series
Category	Scales
Language	English