Need help?Do you have a question about the TA Instruments DSC Autosampler CE and is the answer not in the manual?
Notes, cautions, warnings, CE compliance, and safe lifting procedures.
Overview, features, components, system relationship, requirements, and terminology.
Steps for unpacking, connecting, installing lids, and dust cover.
Using the autosampler in manual mode: starting, mode switching, turret control, pan handling.
Step-by-step guide for calibrating positions and performing diagnostic tests.
Performing diagnostic tests and resolving error messages.
Installing crimping die, setting up tray, preparing sample pans (crimped/hermetic).
Lists of parts, supplies, ordering information, and document index.
General| Category | Laboratory Equipment |
|---|---|
| Manufacturer | TA Instruments |
| Model | DSC Autosampler CE |
| Application | Automated sample handling for DSC analysis |
| Sample Capacity | Up to 54 samples |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Type | Differential Scanning Calorimeter (DSC) Autosampler |
| Compatibility | TA Instruments DSC series instruments |
| Automation | Fully automated sample loading and unloading |
| Temperature Range | Typically matches the DSC instrument range (-180°C to 725°C, depending on DSC model) |
| Cooling Method | Dependent on the DSC instrument connected |
| Heating Rate | Dependent on the DSC instrument connected |
| Cooling Rate | Dependent on the DSC instrument connected |
| Temperature Accuracy | Dependent on the DSC instrument connected |
| Temperature Precision | Dependent on the DSC instrument connected |
| Calorimetric Sensitivity | Dependent on the DSC instrument connected |
| Data Sampling Rate | Dependent on the DSC instrument connected |
| Atmosphere Control | Nitrogen, Argon |
| Software Compatibility | TA Instruments software |
To Next Page
