TA Instruments DSC Autosampler CE User Manual

TA I NSTRUMENTS DSC A UTOSAMPLER CE 2–7
After Preparation
Now that your Autosampler CE has been
completely installed and set up, you will need to
calibrate it so that it will properly pick up and
deposit pans. Calibration is done using the
manual mode functions, which are described in
the next chapter. If you need information on
using the manual mode, turn to Chapter 3. If you
are ready to calibrate the Autosampler CE, turn
to Chapter 4.
After Preparation

TA Instruments DSC Autosampler CE Specifications

General

Brand	TA Instruments
Model	DSC Autosampler CE
Category	Laboratory Equipment
Language	English