TA Instruments DSC Autosampler CE User Manual

1–3TA I NSTRUMENTS DSC A UTOSAMPLER CE
Overview
Your TA Instruments DSC Autosampler CE is a
four-axis robotic device that automatically loads
sample and reference pans to and from the
Differential Scanning Calorimeter (DSC) thermal
analysis instrument. The Autosampler CE will
detect the presence of a single or dual sample
cell and adjust its actions and displays accord-
ingly. Once the Autosampler CE loads the pans
and covers the DSC cell, the controller takes
over and runs a preprogrammed thermal analysis
experiment on your samples. The Autosampler
CE then uncovers the cell and unloads the pans.
You can set up a series of these experiments
and leave them to be executed unattended.
Overview

TA Instruments DSC Autosampler CE Specifications

General

Brand	TA Instruments
Model	DSC Autosampler CE
Category	Laboratory Equipment
Language	English