TA Instruments DSC Autosampler CE User Manual

1–21TA I NSTRUMENTS DSC A UTOSAMPLER CE
System and Equipment
Requirements
The DSC Autosampler CE requires the following
equipment:
 A TA Instruments controller.
 A source of compressed, dry air (15 psi
minimum, 120 psi maximum) for adjusting
the DSC cell temperature between runs.
 A DSC 2920 thermal analysis instrument
(with a DSC heat exchanger).
 DSC sample pans (standard-autosampler or
hermetic).
 The crimping die (included with the DSC
Autosampler CE).
These optional components can be included:
 A nitrogen gas purge.
 An additional gas purge controlled by the
TA Instruments Gas Switching Accessory.
 The TA Instruments Liquid Nitrogen
Cooling Accessory (LNCA) equipped with
an adapter for the DSC for cooling
experiments or Refrigerated Cooling System
(RCS) equipped with environmental
chamber.
The Autosampler CE is considered an accessory
item for an existing instrument and therefore
does not affect the space available for additional
instruments on multi-instrument systems.
Description
NOTE:

TA Instruments DSC Autosampler CE Specifications

General

Brand	TA Instruments
Model	DSC Autosampler CE
Category	Laboratory Equipment
Language	English