TA Instruments DSC Autosampler CE User Manual

TA I NSTRUMENTS DSC A UTOSAMPLER CE 3–13
Unloading Pans
The LOAD key unloads pans that have been
loaded in automatic mode, manual mode, or with
tweezers.
The Autosampler CE does not keep track of the
pans in the sample tray. Be careful not to
unload a pan on top of another pan in the tray.
1. Access the Autosampler CE keypad by
loosening the captive thumbscrews on the
keypad cover and tilting the cover down.
2. Press the LOAD key. You are prompted to
select option 1 (Load) or 2 (Unload):
Load (1) or
Unload (2) ? 1
3. Select the Unload option by pressing the 2
key, then pressing ENTER. You are then
prompted to select which cell position to
unload:
Unload Ref (1) or
Sample (2) ? 1
4. Select a cell position (reference or sample)
by pressing a numeric key, then pressing
ENTER. You are then prompted to select
the destination tray position:
Sample Pan
Number ? 0
NOTE:
Loading and Unloading Pans

TA Instruments DSC Autosampler CE Specifications

General

Brand	TA Instruments
Model	DSC Autosampler CE
Category	Laboratory Equipment
Language	English