TA Instruments DSC Autosampler CE User Manual

Using the Autosampler CE in the Manual Mode
3–12 TA I NSTRUMENTS DSC A UTOSAMPLER CE
4. Select a cell position (reference or sample)
by pressing a numeric key, then pressing
ENTER. You are then prompted to select
the tray position to load from:
Sample Pan
Number ? 1
5. Type a number between 1 and 62; then
press ENTER. The Autosampler CE loads
the pan to the cell position you chose in step
3. If there is already a pan in the cell position
you selected, the Autosampler CE first
returns that pan to its original tray position,
then loads the new pan.
When you have finished using the Autosampler
CE keypad, remember to close the keypad cover
and finger-tighten the thumbscrews before
starting a method.
NOTE:

TA Instruments DSC Autosampler CE Specifications

General

Brand	TA Instruments
Model	DSC Autosampler CE
Category	Laboratory Equipment
Language	English