TA Instruments DSC Autosampler CE User Manual

Calibrating the Autosampler CE
4–36 TA I NSTRUMENTS DSC A UTOSAMPLER CE
6. Allow the Autosampler CE to complete at
least one full cycle of the test:
 Two pans are removed from their tray
positions and placed in the cell.
 The lids are placed on the cell.
 The lids are removed.
 The pans are returned to their storage
positions.
If you must stop the test because of calibra-
tion errors, press the ESCAPE/CLEAR
key.
7. Press ESCAPE/CLEAR to stop the Cycle
Pans test after the Autosampler CE com-
pletes at least one cycle of the test.
When you have finished using the Autosampler
CE keypad, remember to close the keypad cover
and finger-tighten the thumbscrews before
starting a method.
NOTE:

TA Instruments DSC Autosampler CE Specifications

General

Brand	TA Instruments
Model	DSC Autosampler CE
Category	Laboratory Equipment
Language	English