TA I
NSTRUMENTS
DSC A
UTOSAMPLER
CE 3–17
To execute the Reset Sampler command, press
ENTER. To cancel the Reset Sampler command
and return to the previous operation, press
ESCAPE/CLEAR.
If you press ENTER to continue the reset, the
display shows:
Manual Mode
Resetting
When the Autosampler CE reaches home
position, the display displays:
Manual Mode
Idle
and the Autosampler CE is ready for a com-
mand.
When the Autosampler CE is in automatic
mode, the RESET SAMPLER key stops the AS
run sequence and method currently being
executed from the controller.
NOTE:
Stopping the Autosampler CE
To Next Page
Loading...