TA Instruments DSC Autosampler CE - Page 73

TA I NSTRUMENTS DSC A UTOSAMPLER CE 4–5
Table 4.1 (continued)
Screen Display Autosampler CE Position
The dimple in the DSC cell where
the reference pan is placed (the
rear position).
The dimple in a DSC cell where the
sample pan is placed. (For dual
sample cells [not shown], choose side
A or B.)
The small, silver lids storage
position.
(table continued)
Calibrate/Verify
Sample Pos.
Calibrate/Verify
Lid #1 Storage
Calibrate/Verify
Cell Ref. Pos.
Overview
Calibrate/Verify
Sample A/B
Single Sample Cell Display
Dual Sample Cell Display
Single Sample DSC Cell