TA Instruments DSC Autosampler CE User Manual

TA I NSTRUMENTS DSC A UTOSAMPLER CE 4–7
Table 4.1 (continued)
Screen Display Autosampler CE Position
Position 1 on the sample tray.
Position 11 on the sample tray.
Position 59 on the sample tray.
Calibrate/Verify
Tray Pos. #11
Calibrate/Verify
Tray Pos. #59
Calibrate/Verify
Tray Pos. #1
Overview

TA Instruments DSC Autosampler CE Specifications

General

Brand	TA Instruments
Model	DSC Autosampler CE
Category	Laboratory Equipment
Language	English

Summary

Safety, Introduction, and Preparation

Safety and Handling Precautions

Notes, cautions, warnings, CE compliance, and safe lifting procedures.

Introduction to DSC Autosampler CE

Overview, features, components, system relationship, requirements, and terminology.

Initial Setup and Preparation

Steps for unpacking, connecting, installing lids, and dust cover.

Operation, Calibration, and Diagnostics

Manual Mode Operation

Using the autosampler in manual mode: starting, mode switching, turret control, pan handling.

Calibration Procedures and Tests

Step-by-step guide for calibrating positions and performing diagnostic tests.

Diagnostics and Error Handling

Performing diagnostic tests and resolving error messages.

Sample Preparation and Reference

Sample Preparation

Installing crimping die, setting up tray, preparing sample pans (crimped/hermetic).

Reference Information

Lists of parts, supplies, ordering information, and document index.