TAC AB, 1998-10-23 0-004-7614-0 (GB), 4:1 (6)
TAC 2413 Handbook Day-to-day usage
4 Day-to-day usage
4.1 Introduction
This chapter provides enough information for you to be able to
read and set temperatures and other parameters during normal
operation. All parameters and functions are explained in detail in
Chapter 7, Functional description.
If you want to switch between the parameter groups P 00–P 17
and P 18–P 99, press
and at the same time.
4.2 Reading temperatures
Procedure for reading a temperature:
1 Choose the parameter number (P No.) using
or
according to the list below. You can increase the number by
pressing
and decrease it by pressing .
2 Hold the button down for fast increase/decrease.
3 Read the value.
Temperature P No.
Supply air temperature P 01
Calculated SP for supply air temperature P 02
Room temperature P 03
Calculated SP for room/return air temp. P 04
Return air temperature P 05
Exhaust air temperature P 08
Outdoor temperature P 09
0
1
2
3
4
5
6
78
9
10
11
12 13 14 15
16 17
18
19
20
21
22
23
24
1
2
P:01
14.7 °C
To Next Page
Loading...
