CHAPTER 7 MANUAL OPERATION
74
9. TABLE UP/DOWN DEVICE (TEHX-C)
<How to call the screen>
1. Select table up/down device
It activates the table up/down device to
adjust table height.
When performing this operation, move the
frame to the rearmost.
When the frame is positioned at the front,
error code “228” will be dis-
played. p.106
2. Up/down operation
Move up/down the table using frame travel
key.
It is not possible to use jog remote-control-
ler.
3. End
WARNING
When performing this operation, do not put your hands under the
needle or on the machine table. If your hands are under the needle
or on the machine table, you may be injured by the needle or the
moving frame.
(GC07)
Xa:43.2
Ya:-276.1
!
Screen 1400
1
Xa:43.2
Ya:-367.9
Screen 1400
Stop
Raising
Lowering
Xa:43.2
Ya:-367.9
Screen 1400
Stop
2
Xa:43.2
Ya:-367.9
To Next Page
