6-4
Connecting the WebCam
You can connect a WebCam to your computer through the USB
port. To connect the WebCam:
1. Turn on the computer and install the WebCam driver.
2. Connect your WebCam to the computer.
3. The computer may auto detect your WebCam driver and
enable the WebCam function. If there is no detection of
you WebCam you can manually enable the WebCam by
going to Start Menu Æ Control Panel Æ Add Hardware to
add the new device.
Connecting the Keyboard
You can connect a mouse to your computer through the PS2
port or USB port. If there is no PS port available on your
computer, but you only have mouse of PS2 connector, please
purchase a USB connector first. To connect the mouse:
1. Turn on the computer and install the mouse driver.
2. Connect your mouse to the computer.
3. The computer may auto detect your mouse driver and
enable the mouse function. If there is no detection of
you mouse you can manually enable the mouse by going
to Start Menu Æ Control Panel Æ Add Hardware to add
the new device.
To Next Page
Loading...