TDK-Lambda G30-170 - Auxiliary Commands

95
Model Rated Output
Voltage (V)
Minimum (V)
Maximum (V)
10 0.5 12
20 1.0 24
30
1.5
36
300 15 330.75
600 30 661.5
Table 5-6: OVP Programming Range
Model Rated Output
Voltage (V)
Minimum (V)
Maximum (V)
10 0 9.5
20 0 19
30 0 28.5
300
0
285
600 0 570
Table 5-7: UVL Programming Range
5.10.8 Auxiliary Commands
LANG SCPI
Function Set a communication protocol to the SCPI language.
The Power Supply addressing is lost after the communication language change.
RIE <Bool>
Function Enable / Disable ILC function. If disabled, Power Supply ignores the ILC pin
state.
Parameters
0|1, OFF|ON
Query
RIE?
Returns
<Bool> OFF|ON
PVS <DSC>
Function Set the Voltage programming source: Front Panel, External Resistor, or
External Voltage.
Parameters
0|1|2 or DIG|VOL|RES
Query
PVS?
Returns
<DSC> DIG|VOL|RES