TEC TECDrive20-EU Series - Page 52

TECDrive20-EU Series Inverter Function parameters
-47-
Function
code
Name
Description
Default
Modify
P02.10
Non-load
current of
async-motor
0.1–6553.5A
Depend
on
model
○
P02.11
Magnetic
saturation
coefficient 1 for
iron core of
async-motor 1
0.0–100.0%
80.0%
◎
P02.12
Magnetic
saturation
coefficient 2 for
iron core of
async-motor 1
0.0–100.0%
68.0%
◎
P02.13
Magnetic
saturation
coefficient 3 for
iron core of
async-motor 1
0.0–100.0%
57.0%
◎
P02.14
Magnetic
saturation
coefficient 4 for
the iron core of
async-motor 1
0.0–100.0%
40.0%
◎
P02.26
Motor overload
protection
selection
0: No protection
1: Common motor (with low speed
compensation). Because the heat-releasing
effect of the common motors will be weakened,
the corresponding electric heat protection will be
adjusted properly. The low speed compensation
characteristic mentioned here means reducing
the threshold of the overload protection of the
motor whose running frequency is below 30Hz.
2: Frequency conversion motor (without low
speed compensation). Because the
heat-releasing of the specific motors won't be
impacted by the rotation speed, it is not
necessary to adjust the protection value during
low-speed running.
2
◎