TEC TECDrive20-EU Series - P08 Group Enhanced Functions

TECDrive20-EU Series Inverter Function parameters
-73-
Function
code
Name
Description
Default
Modify
P07.39
Input terminals state of present fault
0
●
P07.40
Output terminals state of present fault
0
●
P07.41
Running frequency of the last fault
0.00Hz
●
P07.42
Ramps reference frequency of the last fault
0.00Hz
●
P07.43
Output voltage of the last fault
0V
●
P07.44
Output current of the last fault
0.0A
●
P07.45
Bus voltage of the last fault
0.0V
●
P07.46
Max. temperature of the last fault
0.0°C
●
P07.47
Input terminals state of the last fault
0
●
P07.48
Output terminals state of the last fault
0
●
P07.49
Reference frequency of the last but one fault
0.00Hz
●
P07.50
Ramp reference frequency of last but one fault
0.00Hz
●
P07.51
Output voltage of the last but one fault
0V
●
P07.52
Output current of the last but one fault
0.0A
●
P07.53
Bus voltage of the last but one fault
0.0V
●
P07.54
Max. temperature of the last but one fault
0.0°C
●
P07.55
Input terminals state of the last but one fault
0
●
P07.56
Output terminals state of the last but one fault
0
●
P08 group Enhanced functions
Function
code
Name
Description
Default
Modify
P08.00
ACC time 2
When the terminal acts as ACC/DEC time
selection (see terminal function settings in the
P05 group), you need to select four groups of
ACC/DEC time through state combinations of
these two terminals.
Terminal
1 (21)
Terminal
2 (22)
ACC/DEC time
setting
Parameters
OFF
OFF
ACC/DEC time 1
P00.11/
P00.12
ON
OFF
ACC/DEC time 2
P08.00/
P08.01
OFF
ON
ACC/DEC time 3
P08.02/
P08.03
ON
ON
ACC/DEC time 4
P08.04/
P08.05
Depend
on
model
○
P08.01
DEC time 2
○
P08.02
ACC time 3
P08.03
DEC time 3
○
P08.04
ACC time 4
○
P08.05
DEC time 4
○