TECDrive20-EU Series Inverter Safety precautions
-1-
Chapter 1 Safety precautions
Please read this manual carefully and follow all safety precautions before moving, installing,
operating and servicing the inverter. If ignored, physical injury or death may occur, or damage
may occur to the devices.
If any physical injury or death or damage to the devices occurs for ignoring to the safety
precautions in the manual, our company will not be responsible for any damages and we are
not legally bound in any manner.
1.1 Safety definition
Serious physical injury or even death may occur if not follow relevant
requirements.
Physical injury or damage to the devices may occur if not follow relevant
requirements.
Physical hurt may occur if not follow relevant requirements.
People working on the device should take part in professional electrical
and safety training, receive the certification and be familiar with all steps
and requirements of installing, commissioning, operating and maintaining
the device to avoid any emergency.
1.2 Warning symbols
Warnings caution you about conditions which can result in serious injury or death and/or
damage to the equipment, and advice on how to avoid the danger. Following warning symbols
are used in this manual:
Serious physical injury or even death
may occur if not follow the relative
requirements
Physical injury or damage to the
devices may occur if not follow the
relative requirements
Damage to the PCBA board may
occur if not follow the relative
requirements
Sides of the device may become hot.
Do not touch.
Physical hurt may occur if not follow
the relative requirements
To Next Page
Loading...