6. LSServer, Scanner Shell and Download
2004-11 Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5 6-7
The Measurement Control dialog box consists of the following elements:
• The Measurement group element with the Start and Prescan button
• The Instrument group element to move plate and filters and to switch on
lasers
• The Measurement Parameter group element to Edit parameters or to
Save and Load certain predefined parameter files
• The Settings group element with the Settings button to enter the
filename and to select the scan areas
• The Slide Adapter Format group element to load existing Slide Adapter
Format (.saf) files
• The Slides to Process group element to display arrangement of the scan
areas
• File size of chosen slides
Measurement
The Measurement group contains the following elements:
Start button Click the Start button to start a measurement with the
current measurement parameter. The Status dialog
box is displayed.
Prescan button Click the Prescan button to select three different
prescan modes:
o Image prescan
o Adapter prescan
o Focus prescan
Instrument
The Instrument group contains the following elements:
Plate / Filter button Click the Plate / Filter button to open the Movements
dialog box: Plate and filter can be moved.
Laser Control button Click the Laser Control button to open the Laser
Control dialog box: Laser type can be selected and
power control can be set / changed.
Measurement Parameter
The Measurement parameter group contains the following elements:
Edit button Click the Edit button to open the Measurement
Parameter dialog box: Measurement parameters can
be edited.
Load button Click the Load button to open the Open dialog box:
Measurement parameters can be loaded from a file.
Save button Click the Save button to open the Save As dialog box:
Measurement parameters can be saved to a file.
To Next Page
Loading...