4. Firmware and Software Description
4-4 Technical Manual for sunrise RC, TW, TS, TC, BC, 6F No. T 137 302 Rev No. 1.1 2004-10
4.2 Rdr OLE Server
This program enables the user to define the settings of:
Instrument modes
Filter definition
Measurement modes
4.2.1 Installation of Instrument Control Software
Note:
For more information about installing the software,
see Magellan or XRead Plus manual,
which can be found on the TECAN Detection Suite CD.
4.3 sunrise Instrument Settings
This program enables the user to define the settings of:
Instrument modes
Filter definition
Measurement modes
4.3.1 Installation of sunrise Instrument Settings Software
The sunrise Instrument Settings software is installed using the following
procedure:
• Insert TECAN Detection Suite CD into the required CD ROM drive.
• Double-click the Setup icon under Software\RdrDownload to start the
installation program.
• A series of dialog boxes will appear, read each one, enter any necessary
information and click Next to continue.
• The files are then installed and the program icon is created.
• When the Installation Complete dialog box appears, click Finish and the
sunrise Instrument Settings program is ready to be used.
To Next Page
