Technics EAH-AZ100 - Convenient Function; Listen to Music; Talk

Listen to music
If a Bluetooth
®
device supports the “A2DP” and “AVRCP” Bluetooth
®
profiles, you can use the
earphones to play music and video.
R With the EAH-AZ100, you can use the earphones to control LE Audio compatible Bluetooth
®
devices to play music and videos.
“About LE Audio (EAH-AZ100)”, Page 55
1 Connect the Bluetooth
®
device and earphones.
2 On the Bluetooth
®
device, select and play the music or video.
R The earphones will play the audio of the music or video.
R You can adjust the volume by using the touch sensor (L) on the earphones.
“Use the touch sensors”, Page 41
EAH-AZ100: “Operating time (Earphones)”, Page 80
EAH-AZ80/EAH-AZ60M2: “Operating time (Earphones)”, Page 82
EAH-AZ40M2: “Operating time (Earphones)”, Page 84
Note:
R A2DP (Advanced Audio Distribution Profile): Transmits audio to the earphones.
R AVRCP (Audio/Video Remote Control Profile): Allows remote control with the earphones.
R Be aware that sound may leak from the earphones depending on the volume.
R Music may sound distorted if you increase the volume to near maximum. Decrease the
volume.
R EAH-AZ100/EAH-AZ80/EAH-AZ60M2: At default settings, the music pauses when you take
off the earphones during playback, and resumes when you wear them again within about 1
minute. You can change the settings.
“Set the headphone fitting sensor (EAH-AZ100/EAH-AZ80/EAH-AZ60M2)”, Page 54
R The [Technics Audio Connect] app for the EAH-AZ100 allows you to hold conversations while
wearing the earphones and listening to music. You must set in advance.
“One-touch Conversation Mode (EAH-AZ100)”, Page 61
Talk
If a Bluetooth
®
phone (mobile phone or smartphone) supports the “HSP” or “HFP” Bluetooth
®
profile, you can use the earphones to talk.
R With the EAH-AZ100, if a Bluetooth
®
phone (mobile phone or smartphone) supports the LE
Audio, you can use the earphones to talk.
“About LE Audio (EAH-AZ100)”, Page 55
1 Connect the Bluetooth
®
phone and earphones.
2 When receiving a call, touch an earphone touch sensor (L or R) once to answer.
R When receiving a call, the ringtone plays from the earphones.
R (HFP only) To reject a call, touch and hold a touch sensor (L or R) for about 2 seconds.
3 Talk.
R You can adjust the volume or mute the call by using the touch sensors on the earphones.
“Use the touch sensors”, Page 41
R With the EAH-AZ100, you can reduce the other party’s surrounding sounds by touching
the touch sensor (R) 3 times during a call. You must set in advance.
38
Convenient Function