EasyManua.ls Logo

Technics EAH-AZ100 - Charge Wirelessly (EAH-AZ100;EAH-AZ80;EAH-AZ60 M2)

Technics EAH-AZ100
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 Put the earphones into the charging cradle.
R The LED (light blue) flashes once on each side. (Put the earphones into the charging
cradle again if the LED does not flash.)
R Charging time (the time from empty to full charge)
Charging only the earphones About 2.0 hours
EAH-AZ80/EAH-AZ60M2/EAH-AZ40M2
You can charge the earphones with the charging cradle if it is sufficiently charged, even when
there is no power supply nearby.
1 Put the earphones into the charging cradle.
R The earphone status indicator LED quickly flashes red (twice). (Put the earphones into
the charging cradle again if the LED does not flash.)
R The earphone status indicator LED lights up (red), and charging starts.
R Charging is complete when the earphone status indicator LED turns off.
R Charging time (the time from empty to full charge)
Charging only the earphones About 2.0 hours
Note:
R If the charging cradle is fully charged, you can charge earphones with no charge about two
times.
Charge wirelessly (EAH-AZ100/EAH-AZ80/EAH-AZ60M2)
You can charge this unit with a separately sold Qi standard wireless charger. For information
about your wireless charger, please refer to its manual.
1 Close the charging cradle lid.
2 Place the charging cradle on the wireless charger with the Technics logo facing up.
R Qi charging contact position
EAH-AZ100: Qi charging contact Page 15
EAH-AZ80: Qi charging contact Page 17
EAH-AZ60M2: Qi charging contact Page 19
Important:
R The unit is not guaranteed to charge with all commercially available Qi standard wireless
chargers.
R This unit does not support wireless chargers that are not Qi standard certified or have
magnetic attachments. Do not use these chargers to charge the charging cradle. (It may
cause the charging cradle to malfunction.)
R Do not charge wirelessly in the following places.
In humid, dusty, or shaky areas, or near telephones, TVs, radios, or devices with built-in
magnets
R Before charging wirelessly:
Remove any covers attached to the charging cradle.
27
Let’s Get Started

Table of Contents

Related product manuals