(The material and thickness of covers, or foreign matter such as dust caught between the
charging cradle and covers, may prevent the battery from charging properly and result in
fire, burns, or injury.)
– If there are other devices that support wireless charging nearby, keep them at least 30 cm
away.
(The wireless charger may not detect the charging cradle correctly and charging may fail.)
R While charging wirelessly:
– Do not place metal objects (such as coins, or straps and clips that contain metal) on the
wireless charger. (It may result in fire, burns, or injury.)
– If you hear noise from a TV or radio, charge in a place farther away from the TV or radio.
– Do not use a wireless charger while it is covered with something such as a blanket.
R If you have an electronic medical device such as an implanted cardiac pacemaker or
defibrillator, consult your physician before using a wireless charger. (It may result in radio
waves that adversely affect the operation of electronic medical devices.)
R Do not attach metal objects (such as stickers with materials that contain metal) to the wireless
charger or charging cradle. (It may result in fire, burns, or injury.)
R Keep IC cards, magnetic cards, and magnetic objects away from the wireless charger.
– IC cards may malfunction. Magnetic data on cash cards, credit cards, telephone cards, and
floppy disks may be erased. Placing the charger close to a strong magnetic field may also
result in malfunction.
Note:
R If the charging cradle is not placed properly during wireless charging, charging may be slower,
charging may stop, or the wireless charger, earphones, and charging cradle may get hot.
R Depending on your wireless charger, charging may be slower or may stop at high or low
temperatures. Also, although the earphones and charging cradle may get warm while and
after charging, it is not a malfunction.
Turn the earphones on/off
EAH-AZ100
Turn on
1 Take out the earphones from the charging cradle.
R A startup sound will play.
If the earphones are difficult to remove
“The earphones are difficult to remove.”, Page 68
Turn off
1 Put the earphones into the charging cradle.
R When the earphones are put in the charging cradle, the LED (light blue) flashes once on
each side.
(Put the earphones into the charging cradle again and charge the charging cradle if the
LED does not flash.)
28
Let’s Get Started
To Next Page
Loading...
