5 Tap [Next].
6 Tap [Test].
R Do not touch the earphones while measuring.
7 Check the result.
If a size is displayed in “Next earpiece size”, replace with the displayed earpiece, tap
[Replaced] and go to step 6.
R Repeat steps 6 and 7 until the size is displayed in “Confirmed size”.
If the size is displayed in “Confirmed size”, proceed to step 8.
(Depending on the result, the earpiece may need to be replaced.)
If “Could not measure” is displayed in “Confirmed size”, tap [Try again] and start over from
step 3.
8 Tap [OK].
Note:
R The result is a guide. It does not guarantee the effect of noise cancelling.
R If the test is repeated, the result may vary due to changes in the measurement environment
and wearing conditions.
R Depending on the shape of the ear, it may not be possible to determine the best earpieces.
Select the most stable earpieces.
R If the size of earpieces is determined to be optimal and you feel uncomfortable with the
earpieces, replace them with earpieces that are more comfortable to wear.
Add/change/find headphones
1 In the home screen of the [Technics Audio Connect] app, tap [SETTINGS].
2 Tap [Add headphones], [Use other headphones], or [Find headphones].
R Add headphones: Select a model to pair in the app and start pairing.
R Use other headphones: Select from other paired headphones.
R Find headphones: “Play a sound to find the headphones”, Page 51
3 Follow the on-screen instructions.
Set auto power off
1 In the home screen of the [Technics Audio Connect] app, tap [SETTINGS].
2 Tap [Auto power off].
3 Select the time it takes for the headphones to turn off after a period of silence.
Set the headphone fitting sensor (EAH-AZ100/EAH-AZ80/
EAH-AZ60M2)
You can set how the earphones work when you wear or take off the earphones.
1 In the home screen of the [Technics Audio Connect] app, tap [SETTINGS].
54
Convenient Function
To Next Page
Loading...
