Technics EAH-AZ100 - Specifications; Eah-Az100

Note:
R Do not apply force to the contact pin from the side or at an angle. (It may result in malfunction.)
Specifications
EAH-AZ100
n General
Power supply (Charging cradle)
DC 5 V, 500 mA (USB charge)
Built-in Battery
Earphones: 3.7 V, Lithium polymer
Charging cradle: 3.7 V, Lithium polymer
Built-in Battery Capacity
Earphones: 85 mAh
Charging cradle: 550 mAh
Operating time (Earphones)
*1
Approx. 10.0 hours (Noise cancelling: ON, AAC)
Approx. 12.0 hours (Noise cancelling: OFF, AAC)
Approx. 8.0 hours (Noise cancelling: ON, SBC)
Approx. 12.0 hours (Noise cancelling: OFF, SBC)
Approx. 7.0 hours (Noise cancelling: ON, LDAC)
Approx. 8.0 hours (Noise cancelling: OFF, LDAC)
Approx. 5.0 hours (Noise cancelling: ON, LC3)
Approx. 5.0 hours (Noise cancelling: OFF, LC3)
Operating time (Earphones + Charging cradle)
*1
Approx. 28 hours (Noise cancelling: ON, AAC)
Approx. 29 hours (Noise cancelling: OFF, AAC)
Approx. 24 hours (Noise cancelling: ON, SBC)
Approx. 26 hours (Noise cancelling: OFF, SBC)
Approx. 18 hours (Noise cancelling: ON, LDAC)
Approx. 19 hours (Noise cancelling: OFF, LDAC)
Approx. 15 hours (Noise cancelling: ON, LC3)
Approx. 15 hours (Noise cancelling: OFF, LC3)
80
FAQ