1 In the home screen of the [Technics Audio Connect] app, tap [SETTINGS].
2 Tap [Touch Sensor Noise Cancelling Settings].
3 Select 2 or more modes.
4 Tap [Set].
5 Tap [OK].
Select an ambient mode
Ambient sound allows you to select the mode when listening to sounds from your surroundings
without removing the earphones.
1 In the home screen of the [Technics Audio Connect] app, tap [SETTINGS].
2 Tap [Ambient mode settings].
3 Select a mode.
R Transparent: Transmits external sounds as-is. (Music does not pause.)
R Attention: Pauses music and emphasizes voices such as conversations and
announcements.
Optimize noise cancelling (EAH-AZ100/EAH-AZ80/
EAH-AZ60M2)
1 In the home screen of the [Technics Audio Connect] app, tap [SETTINGS].
2 Tap [Optimizing noise cancellation (pre-adjustment)].
3 Move up or down to adjust the level.
R Adjust to a level that minimizes noise in noisy areas.
4 Tap [Confirm].
5 Tap [OK].
Voice Focus AI settings (EAH-AZ100)
You can suppress ambient sounds during a call.
Suppress sounds around you
1 In the home screen of the [Technics Audio Connect] app, tap [SETTINGS].
2 Tap [Voice Focus AI settings].
3 Turn on [Suppress sounds around you].
60
Convenient Function
To Next Page
Loading...
