EasyManuals Logo

TechniSat DigiCorder S2 User Manual

TechniSat DigiCorder S2
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #104 background imageLoading...
Page #104 background image
Connection to PC via host to host
cable
LNB power supply:
LNB current 2 x 400 mA max.; double insulated
LNB voltage vertical <14,0V no load, > 11,5 V at 400
mA
LNB voltage horizontal < 20 V no load, > 17,2 V at 400
mA
LNB switched off in stand-by mode
22 kHz modulation: 22 kHz, Amplitude 0.6 V +/- 0.2 V
Programme memory/satellite positions:
No. of programmes Favourites list TV:
2000 TV programmes
No. of programmes Favourites list Radio:
2000 RADIO programmes
Number of programmes:
Total list TV/Radio: Total of 6000 programmes possi-
ble in Total list
DiSEqC:
DiSEqC 1.0 and DiSEqC 1.2
SFI data:
SFI preview: maximum 7 days in advance
Timer:
Events: maximum 124 events, one year in
advance
Remote control system: RC-5
Sub-system address 8 (SAT 1), 10 (SAT 2)
Modulation frequency 36 kHz
Infra-red wavelength 950 nm
Power supply:
Mains adapter plug:
Power consumption:
< 1 W in stand-by mode (stand-by LED)
< 2,5 W* in stand-by mode (stand-by clock)
14 W Operation (without LNB, without
hard drive)
50 W Recording mode / 400mA LNB
power, connected USB and 2 CI
modules inserted
*) not applicable during SFI update
Nominal voltage:
230 V / 50 Hz alternating current
Input voltage:
180 V.... 250 V / 50 Hz alternating current
General:
Dimension (WxDxH): 370 mm x 220 mm x 65 mm
Weight: approx. 2,7 kg
104
BED_ANL_DIGICORDER_S2_28/03.QXD 30.03.2006 11:38 Uhr Seite 104

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TechniSat DigiCorder S2 and is the answer not in the manual?

TechniSat DigiCorder S2 Specifications

General IconGeneral
BrandTechniSat
ModelDigiCorder S2
CategoryReceiver
LanguageEnglish

Related product manuals