8.1.2.3 Changing timer programming
> To change an existing timer setting, use the arrow
keys up/down to mark the timer event you wish to
change.
> Press the green function key Change to go to the
settings of the marked timer. Proceed to change these
as described under Point 8.1.2.
> Now use the arrow keys up/down to mark the
additional Type field displayed.
> Confirm by pressing OK.
A window will be opened, displaying the timer types
available.
> Use the arrow keys up/down to select the desired
type of timer.
> To accept the timer type, confirm by pressing OK.
> When you have completed the programming, press
the green function key Accept to store the data in
memory.
8.1.2.4 Delete timer programming
> Use the arrow keys up/down to delete an existing
timer setting.
> Press the yellow function key Delete.
A query message will be displayed: “Do you really
want to delete this timer ?”
> Use the arrow keys left/right to select Yes.
> To delete the timer entry, confirm by pressing OK.
8.1.2.5 Programming a new timer event
> To programme a new timer event, use the arrow
keys up/down to mark a free line in the menu
Timer overview.
> Press the green function key New to go to the entry
window for programming a new timer event. Now
make your settings here in accordance with Point
8.1.2.
> Use the arrow keys up/down to mark the additio-
nal field Type displayed.
> Confirm by pressing OK.
A window will be opened, listing the timer types availa-
be.
50
To Next Page
Loading...
Need help?
General
