Loading SFI data
Your digital receiver features an electronic programme guide
(EPG) called SFI (SiehFern Info). For the data of this electro-
nic programme guide to be displayed, you must first downlo-
ad the SFI data from the satellite.
When you have completed the update of your programme list,
resp. the programme scan, your receiver will automatically
download the SFI data. This procedure can take up to 30
minutes.
> If you do not wish to wait for the SFI data to be down-
loaded, you can skip this procedure. To do this, press
the yellow function key Skip. (Fig. 5-7)
The SFI data will then be automatically updated the
following night, or you can update them manually at
any time (see Point 7.5.1).
Ending the installation assistant
> Confirm the final message
(Fig. 5-8) of the installation assistant by pressing the
green function key Finish, to return to normal opera-
tion.
6 Settings
Now that you have connected your new digital receiver, and
commenced operating it, you can, if you wish, proceed to
optimise its functions for your preferences.
6.1 Operating language
This menu item gives you the opportunity of setting the lang-
uage used in all the menues according to your preference.
To change the operating language proceed as follows:
> Use the Menu key to call up the Main menu. (Fig.
6-1)
> Now use the arrow keys up/down to mark the
menu line Operating language.
> Confirm by pressing OK.
The sub-menu Operating language will be display-
ed.
> Use the arrow keys up/down to select the desired
language.
> Press the OK key to store the entry, and to return to
the Main menu.
> Press the red function key Back to return to normal
operation.
18
(Fig. 6-1)
(Fig. 5-8)
(Fig. 5-7)
To Next Page
Loading...
Need help?
General
