Technogym Skillmill GO - Page 29

Skillmill:
Technical Service Guide - Rev. 2.2
Page 29
e-mail: support@technogym.com
To charge the baery, connect the power sup-
ply to the equipment socket.
It is also possible to remove the baery. To
charge it in another place without moving the
equipment, follow the instructions provided
below:
1-Remove the baery from its housing;
2-Disconnect the two connectors that connect
the baery to the equipment;
3-Connect the power supply to the baery;
4-Let the baery charge for at least 16 hours;