SPAZIO FORMA: Service & Maintenance manual - rev. 1.0
Page 10.1
10. SCHEDULED MAINTENANCE
To keep the machine in perfect working order, it is necessary to carry out certain scheduled
maintenance actions in order to forestall possible problems. There are essentially 3 types of
maintenance operations:
• Daily maintenance operations;
• Fortnightly maintenance operations;
• Bimonthly maintenance operations;
• Yearly maintenance operations.
The prescribed frequency differs for each type of operation, as does the required level of operator
qualification. The following paragraphs detail the recommended procedures.
10.1. DAILY MAINTENANCE OPERATIONS
These operations can be carried out by the machine owner and do not require any
special skills.
The daily maintenance operations are simple cleaning actions for the purposes of general hygiene.
For daily maintenance, proceed as follows:
10.1.1. SETTING UP THE OPERATION
1. Turn off the machine by placing the switch in the 0 (OFF) position.
2. Unplug the mains lead from the wall outlet.
10.1.2. CLEANING OPERATIONS
1. Using a cloth moistened with a neutral (non acidic) soap, clean the entire machine, taking care
not rub too hard, especially on the display keys.
Never spray the cleaning product directly on the machine.
WARNING: do not use alcohol, gasoline or other chemical products.
To Next Page
Loading...
