Technogym Spazio Forma - Tools to Use

SPAZIO FORMA: Service & Maintenance manual - rev. 1.0
Page 11.9
11.5. TOOLS TO USE
The following tools are necessary to carry out all disassembly, adjustment and maintenance
operations on the machines:
• Small flat-hand screwdriver;
• Small-sized Philips screwdriver;
• Medium-sized Philips screwdriver;
• 10-gauge wrench;
• 13-gauge wrench;
• 17-gauge wrench;
• 19-gauge wrench;
• 7-socket spinner wrench;
• 2.5-gauge hexagonal T-wrench;
• 3-gauge hexagonal T-wrench;
• 4-gauge hexagonal T-wrench;
• 5-gauge hexagonal T-wrench;
• 6-gauge hexagonal T-wrench;
• 8-gauge hexagonal T-wrench;
• 10-gauge hexagonal T-wrench 14;
• Special tool provided by Technogym for the eccentrics of the wheels;
• Torque wrench.
• Hammer
CAUTION: Tool measurements are expressed in mm.