EasyManua.ls Logo

TECO speecon 7200ma - Page 21

TECO speecon 7200ma
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
220V CLASS 440V CLASS
Input Voltage Class
1 /3-Phase 3-Phase 3 Phase
JNTMBGBB□□□□JK JNTMBGBB□□□□AZ
MODEL
0001 0002 0003 0005 7R50 0010 0015 0020 0001 0002 0003 0005 7R50 0010 0015 0020
Basic Control
Function
Restart After Momentary Power Loss, PID Control, Auto Torque
Boost, Slip Compensation, RS_485 Communication, Speed
Feedback Control, Simple PLC function, 2 Analog Output Port
Control
Characteristics
Extra Function
Cumulative Power on & Operation Hour memory, Energy Saving,
Up/Down Operation, 4 Different sets of Fault Status Record
(Including Latest one), MODBUS Communication, Multiple-Pulse
Output Ports, etc.
Stall Prevention
During Acceleration/Deceleration and constant Speed Running
(Current Level Can Be Selected During Acceleration and Constant
Speed Running. During Deceleration, Stall Prevention Can Be
Enabled or Disabled)
Instantaneous
Overcurrent
Stopped if above 200% Rated Current
Motor Overload
Protection
Electronic Overload Curve Protection
Inverter Overload
Protection
Stopped if above 150% Rated Current for 1 Min.
Overvoltage Stop if VDC410V (220 Class) or VDC820V (440 Class)
Undervoltage Stop if VDC200V (220 Class) or VDC400V (440 Class)
Momentary Power Loss
Ride-Through time
15ms, stop otherwise
Overheat Protection Protected by Thermistor
Grounding Protection Protection by DC Current Sensor
Protection Function
Charge Indication (LED)
Lit when the DC Bus Voltage Above 50V
Mechanical Construction Enclosed, Wall-Mounted Type (NEMA-1)
Cooling
Forced
*1
Forced
Forced
*1
Forced
Weight (kg)
2.29
*1
2.29
*1
4.25 4.25 5.73 5.73 10.5 10.5
2.29
*1
2.29
*1
4.25 4.25 5.73 5.73 10.5 10.5
Application Site Indoor (No Corrosive Gas And Dust Present)
Ambient Temperature -10ºC ~ +40ºC (Not Frozen)
Storage Temperature -20ºC ~ +60ºC
Ambient Humidity Below 90%RH (Non-Condensing)
Environmental
Condition
Height, Vibration Below 1000M, 5.9m/S
2
(0.6G), (JISC0911 Standard)
Communication Function RS-485 Installed (MODBUS Protocol)
EMI Meet EN50081-2 (1994) With Specified EMI Filter
EMC Compatibility Meet Pr EN 50082-2
Option PROFIBUS Card
*1 : The standard type ( JNTMBGBB□□□□ JK/AZ ) use self cooling. Its weight is 4.12kg.
The compact type ( JNTMBGBB□□□□ JK/AZ S ) use forced cooling. Its weight is 2.29kg.

Table of Contents

Related product manuals