TECO speecon 7200ma - Handling and Inspection; Inspection Procedure upon Receiving

3
1. 7200 MA Handling Description
1.1 Inspection Procedure upon Receiving
Before delivery, Every 7200 MA inverter has been properly adjusted and passed
the demanding function test. After receiving the inverter, the customer should take it
out and follow the below procedure:
•Verify that the Type No. of the inverter you’ve received is the same as the Type No.
listed on your purchase order. (Please read the Nameplate)
• Observe the condition of the shipping container and report any damage
immediately to the commercial carrier that have delivered your inverter.
■ Inverter nameplate:
MODEL
INPUT
OUTPUT
SER. NO.
JNTMBGBB0001AZS - 1
440V CLASS INVERTER
AC 3PH 380-460V 50/60Hz
AC 3PH 0-460V 2.2KVA 2.6A
INVERTER MODEL
INPUT SPECIFICATION
OUTPUT SPECIFICATION
SERIES NO.
D
■ Inverter model number：
JNTMBGBB0001AZ S 1
7200MA
SERIES
ENGLISH DISPLAY
AND MANUAL
RATED VOLTAGE
JK :200 ~ 230V
AZ:380 ~ 460V
UL INFORMATION
－
:STANDARD TYPE
U :UL/CUL STANDARD
BB:ENCLOSED,WALL-MOUNTED
TYPE (NEMA-1)
ENCLOSURE AND MOUNTING
HARDWARE INFORMATION
－
:STANDARD TYPE
S :220V/440V, 1/2HP COMPACT SIZE TYPE
A :220V/440V 7.5/10HP VER 2 TYPE
MAX. APPLICABLE MOTOR
CAPACITY(HP)
0001
：
1HP
7R50
：
7.5HP
0020
：
20HP
~
~
~
~