TECO speecon 7200ma - Inverter Specifications; Electrical Specifications (220 V;440 V)

18
1.7 Inverter Specifications
220V CLASS 440V CLASS
Input Voltage Class
1 /3-Phase 3-Phase 3 Phase
JNTMBGBB□□□□JK JNTMBGBB□□□□AZ
MODEL
0001 0002 0003 0005 7R50 0010 0015 0020 0001 0002 0003 0005 7R50 0010 0015 0020
HP 1 2 3 5.4 7.5 10 15 20 1 2 3 5.4 7.5 10 15 20
Max. Applicable Motor Output
kW
0.75
1.5 2.2 4 5.5 7.5 11 15
0.75
1.5 2.2 4 5.5 7.5 11 15
Rated Output Capacity
(KVA)
2 2.7 4 7.5
10.1 13.7 20.6 27.4
2.2 3.4 4.1 7.5
10.3 12.3 20.6 27.4
Rated Output Current
*
(A)
4.8 6.4 9.6
17.5
24 32 48 64 2.6 4 4.8 8.7 12 15 24 32
Max. Output Voltage
(V)
3 Phase 200~230 V 3 Phase 380~460 V
Output Power
Max. Output Frequency
(Hz)
Through Parameter Setting (0Hz to 400Hz)
Rated Voltage·
Frequency
1- / 3-Phase
200~230V
50/60Hz
3-Phase
200~230V
50/60Hz
3 Phase
380~460V
50/60Hz
Allowable Voltage
Fluctuation
-15% ~ +10%
Power Source
Allowable Frequency
Fluctuation
±5%
Operation Mode Graphic LCD Panel (English and Chinese) with parameters copying
Control Mode Sinusoidal PWM
Frequency Control
Range
0.5Hz ~ 400Hz
Frequency Accuracy
(varied with temperature)
Digital Command: ±0.01% (-10 ~ +40ºC),
Analog Command: ±0.1% (25ºC±10ºC),
Speed Control Accuracy ±0.1％(V/F with PG feedback), ±0.5％(Sensorless Vector Contorl)
Frequency Command
Resolution
Digital Command: 0.01Hz Analog Command: 0.06Hz/60Hz
Frequency Output
Resolution
0.01Hz
Overload Resistibility 150% Rated Current for 1 Min
Frequency Setting Signal DC 0~+10V / 4~20 mA
Acc./Dec. Time 0.0~6000.0 sec ( Accel/Decel Time Can Be Set Independently)
Voltage–Frequency
Characteristics
V/F Curve Can Be Set Through Parameter Setting
Control Characteristics
Regeneration Torque Approx. 20%
*: The rated output current while in continuous operation