Tektronix AFG3000 Series - Source[1|2]]:Burst[:State]

Syntax and Commands
AFG3000 Series Arbitrary/Function Generators Reference Manual 3-43
[SOURce[1|2]]:BURSt[:STATe]
This command enables or disables the burst mode for the specified channel. The
query command returns the state of burst mode.
Group
Source
Syntax
[SOURce[1|2]]:BURSt:STATe {ON|OFF|<NR1>}
[SOURce[1|2]]:BURSt:STATe?
Arguments
ON or <NR1>≠0 enables the burst mode.
OFF or <NR1>=0 disables the burst mode.
Returns
<NR1>
Examples
SOURce1:BURSt:STATe ON
enables the burst mode for the CH 1.