Tektronix AFG3000 Series - Source[1|2]]:Pulse:transition:trailing

Syntax and Commands
3-70 AFG3000 Series Arbitrary/Function Generators Reference Manual
[SOURce[1|2]]:PULSe:TRANsition:TRAiling
This command sets or queries the trailing edge time of pulse waveform.
Group
Source
Syntax
[SOURce[1|2]]:PULSe:TRANsition:TRAiling {<seconds>|MINimum|
MAXimum}
[SOURce[1|2]]:PULSe:TRANsition:TRAiling?{MINimum|MAXimum}
Arguments
<seconds>::=<NRf>[<units>]
where
<NRf> is the trailing edge of pulse waveform.
<units>::=[ns | µs | ms | s]
Returns
<seconds>
Examples
SOURce1:PULSe:TRANsition:TRAiling 200ns
sets the trailing edge time to 200 ns.