Tektronix AFG3000 Series - Source[1|2]]:Frequency:concurrent[:State]

Syntax and Commands
3-50 AFG3000 Series Arbitrary/Function Generators Reference Manual
[SOURce[1|2]]:FREQuency:CONCurrent[:STATe]
This command enables or disables the function to copy the frequency (or period)
of one channel to another channel.
The[SOURce[1|2]]:FREQuency:CONCurrent command copies the frequency (or
period) of the channel specified by the header suffix to another channel. If you
specify CH 1 with the header, the CH 1 frequency will be copied to CH 2.
The[SOURce[1|2]]:FREQuency:CONCurrent? command returns “0” (off) or “1”
(on).
If your arbitrary/function generator is single-channel model, this command is not
supported.
Group
Source
Syntax
[SOURce[1|2]]:FREQuency:CONCurrent {ON|OFF|<NR1>}
[SOURce[1|2]]:FREQuency:CONCurrent?
Arguments
ON or <NR1>≠0 enables the concurrent copy function.
OFF or <NR1>=0 disables the concurrent copy function.
Returns
<NR1>
Examples
SOURce1:FREQuency:CONCurrent ON
copies the frequency value of CH 1 to CH 2.