Tektronix AFG3000 Series - Memory:state:lock

Syntax and Commands
3-24 AFG3000 Series Arbitrary/Function Generators Reference Manual
MEMory:STATe:LOCK
This command sets or queries whether to lock the specified setup memory. If you
lock a setup memory, you cannot overwrite or delete the setup file.
You cannot execute this command for the setup memory of location number 0 (last
setup memory).
Group
Memory
Syntax
MEMory:STATe:LOCK {1|2|3|4},{ON|OFF|<NR1>}
MEMory:STATe:LOCK?{1|2|3|4}
Arguments
ON or <NR1>≠0 locks the specified location of setup memory.
OFF or <NR1>=0 allows you to overwrite or delete the specified location of setup
memory.
Returns
<NR1>
Examples
MEMory:STATe:LOCK 1,ON
locks the setup memory of location number 1.