Tektronix AFG3000 Series - Trace|Data[:Data]

Syntax and Commands
AFG3000 Series Arbitrary/Function Generators Reference Manual 3-99
TRACe|DATA[:DATA]
This command transfers the waveform data from the external controller to the edit
memory in the arbitrary/function generator. The query command returns the binary
block data.
Group
Trace
Syntax
TRACe|DATA[:DATA] EMEMory,<binary_block_data>
TRACe|DATA[:DATA]? EMEMory
Arguments
<binary_block_data>
where <binary_block_data> is the waveform data in binary format.
Returns
<binary_block_data>
Examples
DATA:DATA EMEMory,#42000<DAB><DAB>...<DAB>
transmits a waveform to the edit memory in the arbitrary/function generator. The
block data element #42000 indicates that 4 is the number of digits in 2000 (byte
count) and the 2000 bytes of binary data are to be transmitted.