Tektronix AFG3000 Series - Page 64

Reference
2-24 AFG3000 Series Arbitrary/Function Generators Reference Manual
System Trigger Out
Trigger
Sync
Select Trigg er to generate the trigger signal for
the oscilloscope.
Select Sync to synchronize multiple AFG3000
series instruments.
Clock Ref
Internal
External
Select Internal to accept the internal reference
clock.
Select External to accept an external reference
clock.
Power On
Default
Last
Select Default to set the instrument power-on
status to the default settings.
Select Last to set the instrument power-on
status to the last powered-off settings.
Secure Select Secure to erase all data except Mac
Address, calibration data, and the instrument
serial number.
-more- (1 of 2)
Contrast Select Contrast to change the instrument
display contrast.
Screen Saver
Off On
Select Screen Saver Off to deactivate the
screen saver.
Select Screen Saver On to activate the screen
saver.
Click Tone
Off On
Select Click Tone Off to deactivate the click
sound.
Select Click Tone On to activate the click
sound.
Beeper
Off On
Select Beeper Off to deactivate the beeper
sound.
Select Beeper On to activate the beeper sound.
-more- (2 of 2)
Status Setup Select Setup to list the CH1 and CH2 waveform
parameter configuration.
Select Misc. to list the instrument network
configuration and user preferences.
Misc.
(blank)
Page Up Returns to previous page.
Page Down Moves to next page.
-more- (1 of 3)
Table 2-13: Utility Menu (cont.)
First Level Second Level Third Level Description