Tektronix TDS2024 User Manual

Preface
viii
TDS1000/2000-Series Digital Oscilloscope User Manual
H The Math FFT chapter contains detai led information about how
to use the Mat h FFT function.
H The TDS2CMA Communications Module chapter describes this
optional module and how to set up the RS-232, GPIB, and
Centronics ports to use the oscilloscope with external devices,
such as printers and computers.
H The Appendix A: Specifications chapter includes electrical,
environmental, and physical specific ations for the osc illoscope,
as well as certifications and compliances.
H The Appendix B: Accessories chapte r briefly describes standard
and optional accessories.
H The Appendix C: General Care and Cleaning chapter describes
how to take care of the oscilloscope.
H The Appendix D: Default Setup chapter contains a list of the
menus and controls with the default (factory) settings that are
recalled when you push the DEFAULT SETUP front-panel
button.
H The Appendix E: GPIB and RS-232 Interfaces chapter compares
the two protocols to he lp you decide which one to use.

Tektronix TDS2024 Specifications

General

Channels	4
Bandwidth	200 MHz
Sample Rate	2 GS/s
Record Length	2.5k points
Vertical Resolution	8 bits
Vertical Sensitivity	2 mV/div to 5 V/div
Timebase Range	5 ns/div to 50 s/div
Display Resolution	320 x 240 pixels
Math Functions	Add, Subtract, Multiply, Divide, FFT
Input Coupling	AC, DC, GND
Trigger Modes	Auto, Normal, Single
Trigger Types	Edge, Video, Pulse
Connectivity	USB
Input Impedance	1 MΩ
Maximum Input Voltage	300 V
Interface	USB
Power Supply	100 to 240 V
Dimensions	326 mm x 158 mm x 124 mm