Tektronix TDS2024 User Manual

Operating Basics
36
TDS1000/2000-Series Digital Oscilloscope User Manual
HORIZ MENU. Displays the Horizontal Menu.
SET TO ZERO. Sets the horizontal position to zero.
SEC/DIV. Selects the horizontal time/div (scale factor) for the main or
the window time base. When Window Zone is enabled, it c hanges
the width of the window zone by changing the window time base.
Refer to page 92 for details about creating and using Window Zone.
Trigger Controls
2-channel models
4-channel models
LEVEL and USER SELECT. When you use an Edge trigger, the primary
function of the L EVEL knob is to set the amplitude level the signa l
must cross to cause an acquisition. You can also use the knob to
perform USER SELECT alternative functions. The LED lights below
the knob to indicate an alternative function.

Tektronix TDS2024 Specifications

General

Channels	4
Bandwidth	200 MHz
Sample Rate	2 GS/s
Record Length	2.5k points
Vertical Resolution	8 bits
Vertical Sensitivity	2 mV/div to 5 V/div
Timebase Range	5 ns/div to 50 s/div
Display Resolution	320 x 240 pixels
Math Functions	Add, Subtract, Multiply, Divide, FFT
Input Coupling	AC, DC, GND
Trigger Modes	Auto, Normal, Single
Trigger Types	Edge, Video, Pulse
Connectivity	USB
Input Impedance	1 MΩ
Maximum Input Voltage	300 V
Interface	USB
Power Supply	100 to 240 V
Dimensions	326 mm x 158 mm x 124 mm