Appendix B: Factory Setup
B-4
TDS3000B Serie s User Manual
Control Changed by factory setup to
Utility language No change
Utility date/time display On
Utility I/O No change
Utility hard copy No change
Vertical bandwidth Full
Vertical coupling
DC 1 MΩ
Vertical invert Off
Vertical offset 0V
Vertical position 0div
Vertical probe setup Voltage, 1 X (unless non-1 X probe
attached)
Vertical volts/div 100 mV/div
Video trigger standard 525/NTSC
Video trigger on All lines
Waveform file format No change
XY display Off
To Next Page
Loading...
