Appendix F: Ethernet Setup
Instrument Setup Control Description
Delete Erases the cha
racter at the cursor position.
Clear Clears (erase
s) the current field.
↑ and ↓
Selects a fiel
d to edit.
OK Accept Closes the I
nstrument Setup screen and applies the
network settings.
Menu Off Closes the Instrument Setup screen and returns y ou to
the previous screen without applying changes.
The Printer Configuration Screen
The next fi
gure shows the Printer Configuration scr een.
To select a network printer to which to send hard copy, use the general purpose
knob to select (highlight) a printer. The oscilloscope uses the selected printer until
you
select a different printer.
To add a new printer, push the Add Printer side button. The oscilloscope d isplays
th
e Add Printer screen. (See page 155.)
To rename an existing printer, select a printer and push the Rename Printer
si
de button.
To delete a printer, select a printer and push the Delete Printer side button. If
t
he Confirm Delete button is On, the oscilloscope asks you for confirmation
before deleting the printer.
154 TDS3000C Series Oscilloscope User Manual
To Next Page
Loading...
