Getting Started
Maximizing Operating Time
To maximize the
time that the oscilloscope can operate from a full battery charge,
consider doing these things:
Reduce the dis
play backlight intensity (See page 63.)
Disconnect unused active probes
Only use passive probes
Charging the Battery
The battery charges automatically when the oscilloscope is connected to line
power. You can also charge the battery with the optional external charger
(TDS3CHG).
Configuration Typical charging time
Battery c
harging in oscilloscope with oscilloscope turned
on or off
32 hours
Battery charging with TDS3CHG external charger
6 hours
NOTE. For optimal performance, charge the battery before using it for the first
time or
after prolonged storage.
Refer to the TDS3BATC Rechargable Battery Pack Instructions (Tektronix part
numbe
r 071-0900-04) for information on storage and Battery Maintenance
Guidelines.
12 TDS3000C Series Oscilloscope User Manual
To Next Page
Loading...
