Application Examples
The zoom function works equally well when acquisition is running or is stopped.
Horizontal position and scale changes affect only the display, n ot the next
acquisition.
Saving Data to a USB Flash Drive
You need to do some work inside a remote site. You expect to use the oscilloscope
to look
at signal waveforms, to bring the waveform information back to the office
to complete a report, and to perform additional analysis. To do this, take along a
USB flash drive.
Remote site
When you need to capture screen images, it may be most convenient to first save
them to a USB flash drive. Once on the USB flash drive, you can load the screen
images into a PC, print hard copies with a printer attached to your PC, or import
th
e screen images into desktop publishing software to produce a report.
Similarly, you ca n also save waveform data on the USB flash drive. From the flash
d
rive, you can recall waveforms to the oscilloscope display or you can import the
data into spreadsheet and Mathcad software to perform additional analysis.
46 TDS3000C Series Oscilloscope User Manual
To Next Page
Loading...
